Buy Kingston Brass Bathroom Faucets Online At Overstock Com Our Brass Bathtub Faucet
Buy Kingston Brass Bathroom Faucets Online At Overstock Com Our Brass Bathtub Faucet

Perfect Brass Bathtub Faucet Ideas

Related Tags: How to solder connections on a shower tub valve body moen posi temp scrapping a common bathroom faucet for brass, how to fix a leaking bathtub faucet quick and easy, how to replace bathtub faucet stem part.

hello my name’s Claude Taylor and welcome to my how-to plenty channel to all my bookmarkrs thank you for your continued support your support is most appreciated you can now find all the tools and materials that I am using on these sites at Amazon just go to Amazon and type in how to plumbing and if you’re new to this channel I hope you enjoy the sites and if you do give it a thumbs up and become a bookmarkr thank you with all that said let’s get started with the site all right in this site here we’re going to do is we’re going to prefab and prefab means making it up ahead of time so that it’s all together and we can put it in in one shot and everything’s together and what we’re doing here is we’re going to build a tub and shower valve we’re gonna assemble one let’s start off by taking a few measurements and these measurements are gonna be for the tub spout and this one here if more than was likely 7 inch it’s gonna be for the tub spout and the other one’s gonna be around 54 for the showerhead itself going up to the showerhead now you don’t have to have a fancy cutter like this I do quite a bit of cutting copper pipe and this is a lot easier on the risk so this is why I am using this particular tool this is Milwaukee battery-operated tool cutter this is going to be the tub and shower valve of choice and this is a Moen turbine shower valve and this particular one is designed for Reuben or pecs pipes and fittings the only part that we’re gonna have to use on here that we’re not going to use any PEX pipe is going be the riser going up to the showerhead and the part going down to the tub spout those two pieces will have to be soldered on and that’s to give the shower valve some stability okay before we go to assemble the new parts on the tub and shower round we’re gonna break it down first this is the best way to do it before you start soldering pipe and the first thing we’re gonna do is we’re gonna take this cover off and we’re gonna put this cover back on because that cover makes it easy for the inner towel guy or drywaller to of install the towel and make sure that the valve is sticking out properly and again that’s gonna go back on and what we’re gonna do is remove all the components to this uh tub and shower valve so that when we go to solder to pipe we don’t melt any of the washers or the cartridge inside of it are you know do any damage we don’t wanna take a chance like that so here we’ve removed the cartridge and again this is a Moen posi temp humming shower valve and the pins that just pulled out now those go to the stops and these stops are designed to cut the water off at the valve rather than turn it off to the entire house so if you ever need to replace the cartridge you can just turn the water off right here once you remove the cover plate and they just pull right out and you can see why I’m concerned about soldering the pipe that rubber washer there we don’t want to disfigure or melt it in any kind of way well one thing to keep in mind is that the if for any reason the hot water is not cut on or the cold water either one one will not work without the other the hot and the cold water has to be on at the same time so the dis Val what operate I have all my fittings laid out and ready to go now we’re going to go on with soldering part and first of all we’re going to clean the fittings as clean as we can get them cleaning Mira’s fittings with a wire brush is a very important and these what they call drop eared 90s or you can call them wing 90s and of course this is a copper half-inch cap and the caps are gonna be put on tip rarely I’m only going to one cap but I am doing two because I have another valve on the side that you’re not seeing right now and the cleaning brush that I’m using you can flip it to one side and you can also use the three-quarter inside for three-quarter inch pipe all this is half-inch right now and you can also clean the pipe there’s a section where you can clean the pipe with the same wire brush that I have here taking measurement here that was seven inches and sometimes there’s just a random piece that’s cut and when I talk about a random piece just what it says a random piece that’s grabbed it looked like it’s gonna fit wherever I need it and I can always cut it later now keep in mind here I know a lot of you’re probably reading this site right now and you’re wondering well how come he doesn’t have it set up on a stand or something like that to make this a little easier well in actuality when you’re on job sites sometimes you don’t have that luxury so you emphasize and you do what you can do at the time and here’s the flux – we’re gonna use and on the flux don’t really go do not go light on the flux it’s not necessary to go too heavy but don’t go light on it you want to make sure that these pipes and fittings are flux tough on the inside very good so that the lead-free solder that you’re going to use is going to fuse the two metals together and here’s a little trick I like to do once I’ve cleaned and flux the fittings and as I like to kind of egg-shaped the fitting itself and the pipe so that when I twist it it’s in place and doesn’t fall out as I’m soldering the pipe you can see how I’m squeezing down on the fitting and always wipe off the excess excess flux that’s hanging around it makes for a nice clean solder connection other than that some green stuff buildup on the outside which will deteriorate the pipe pretty quick now when I do when you see me putting the pipe inside of the brass fitting itself I’m gonna egg-shape the pipe not the brass part just only the pipe and this will allow me enough to just squeeze it in there so you’ll see stay tight and snug and won’t rattle or move all over the place when I do go to solder or move the valve around as I’m soldering see that’s nice and tight and that’s gonna keep it stable and again we’re gonna wipe the excess flux off of here and once again I don’t have anything right now that I can’t of race this tub and shower valve on and assemble it to solder it so again improvise improvise and prize okay we have we have one valve here that is totally assembled now it will be ready to go ahead and solder up and we have here is a small bottle of propane gas and of course this is my uh torch setup that I’m going to use I do have a bigger tank that use acetylene but I use usually use that on much larger jobs but a little small job like this this is all I need and this is all you’re gonna need and this particular one you can it strikes and it lights itself and you can just hold the red button down you can see and it will continue to run without you having to hold your hand on the trigger to keep playing on now if you’re interested in learning on how to solder copper pipe I have plenty of sites out there and how to solder copper pipe on YouTube so please go ahead and check those sites out I even have them where I’m installing copper pipe enough in a house so I’m doing quite a bit of soldering on that particular site and the sound has been cut off because I had some people come by and they wanted to talk and talk and talk so I had it I didn’t realize that I went back to edit and so I edit all the conversation out and if you notice when I’m soldering this is give you an idea the flame is always mostly aimed at the fitting itself and the reason for that is the solder is going to follow the hottest point so what is the what it’s doing now by holding it on the fitting and sucking the pipe the solder into the pipe and fitting okay here I go I’m going to make up my little homemade brace here – bricen please so that I can go ahead and solder that cap on there and again you can see that I’m holding the heat on the copper fitting itself and by holding it on the copper fitting you can see that it just suck the solder right up in to a place to where it need to go yeah once all the solder joints are soldered together I’ll take another rag and I’ll clean it up and make it look a lot nicer and neater now that we have it all soldered up and cooled down now it’s time to start and put the valve back together and of course we’re gonna put our stops back in here and it’s important that when you put the stops back and the cartridge that you put the returned pins and please don’t forget to retain a planted pins and here are the retainer pins and you notice when I put the cartridge you see the H and the see the H on the hot see on the right side for the cold and of course we put the retainer pin back in and now we’re going to put our cover plate back on not actually the cover plate but the it’s a template plate so that when they go to put the towel in on the wall that they will leave an opening enough so that we can put our cover plate the trim work actually over it again thanks for reading give me a thumbs up and become a bookmarkr.

Gallery for Perfect Brass Bathtub Faucet Ideas